Physics · Chapter 12

Alternating Current

3 topics · Updated 14 Nov 2026

Alternating current changes direction periodically (V = V₀ sin ωt). In a resistor V and I are in phase; in a capacitor current leads voltage by 90°; in an inductor current lags by 90°. AC circuits also produce electromagnetic waves, ranging from radio waves to gamma rays.

Introduction: AC basics

  • V = V₀ sin ωt, I = I₀ sin ωt; ω = 2πf; Pakistan mains f = 50 Hz (T = 0.02 s), Vrms = 220 V (peak ≈ 311 V).
  • RMS values: Vrms = V₀/√2 = 0.707V₀, Irms = I₀/√2; meters read rms; heating effect equals DC of same value.
  • Peak-to-peak = 2V₀; current reverses 2f = 100 times per second.
  • Average value over a full cycle = 0.

12.1 Phase, phase lag and phase lead in AC circuits

Intro: Phase tells at what stage of its cycle an alternating quantity is at a given instant.

  • Phase = angle θ = ωt (+ φ) in V = V₀ sin(ωt + φ).
  • In phase: V and I reach maximum and zero together (φ = 0).
  • Phase lead: a quantity reaches its maximum earlier (current leads in a capacitor).
  • Phase lag: reaches maximum later (current lags in an inductor).
  • Shown by phasors (rotating vectors) at angle φ.
Vdashed I lags V by 90° (inductor)time →
Phase difference. The dashed current reaches its peak a quarter cycle after the voltage.
  • Why lag/lead happens: an inductor opposes change in current by back emf (current builds slowly); a capacitor must be charged first before voltage builds (current flows first).

Mnemonic: “CIVIL”: in a **C**apacitor **I** leads **V**; **V** leads **I** in an inductor (**L**).

MCQ TRAP: In a capacitor current leads voltage by 90°; in an inductor current lags by 90°. In a resistor they are in phase.

You have read 1 of 3 topics for free

Revised this chapter? Test yourself